Figure 8 Cable ( GYXTC8S )

FlyingFiber’s GYXTC8S figure 8 cable provide 250μm fibers, are positioned in a loose tube made of a high modulus plastic, the tubes are filled with a water-resistant filling compound. The two sides PSP are longitudinally applied over the outer loose tube. Steel wires and loose tubes filled with water proof compound to ensure compact and longitudinally water blocking ,this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene(PE) sheath to be figure 8 structure.

1). High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cost.

2). Good mechanical and temperature performance.

3). High strength loose tube that is hydrolysis resistant.

4). Special tube filling compound ensure a critical protection of fiber.

5). PSP enhancing moisture-proof.

6). Small diameter, light weight and friendly installation.

7). Long delivery length and low price.

8). GYXTC8S cable complies with Standard YD/T 1155-2001 as well as IEC 60794-1.

G.652 G.655 50/125μm 62.5/125μm



@850nm ≤3.0 dB/km ≤3.0 dB/km
@1300nm ≤1.0 dB/km ≤1.0 dB/km
@1310nm ≤0.36 dB/km ≤0.40 dB/km
@1550nm ≤0.22 dB/km ≤0.23dB/km
Bandwidth (Class A) @850nm ≥500 MHz·km ≥200 MHz·km
@1300nm ≥1000 MHz·km ≥600 MHz·km
Numerical Aperture 0.200±0.015NA 0.275±0.015NA
Cable Cut-off Wavelength λcc ≤1260nm ≤1480nm
Cable Type Fiber Count Cable Diameter
Cable Weight kg/km Supporting Wire Spec Connection Diameter Tensile Strength
Long/Short Term N
Crush Resistance
Long/Short Term
Bending Radius
GYXTC8S 2~12 7.65*14.5 118 1.0mm*7
Stranded wires
3.0*2.5 mm
1000/2500 300/1000 80/160
GYXTC8S 14~24 8.2*15.1 129 1.0mm*7
Stranded wires
3.0*2.5 mm
600/1500 300/1000 90/180
Storage/Operating Temperature -40℃ to + 60℃