2 100FX to 6 Port 10/100TX Industrial PoE Switch

FF-IPS0206F is a plug-and-play unmanaged industrial PoE switch. This switch provides 6 10/100Base-TX Ethernet port and 2 100Base-FX fiber port, the Ethernet port support Power-over-Ethernet (PoE) function. The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE802.3af/at standard devices (PD), eliminating the need for additional wiring.
FF-IPS0206F support CE, FCC, RoHS standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power input (48-58VDC). The switch support IEEE802.3, IEEE802.3u, IEEE802.3x with 10/100Base-TX, full/half-duplex, and MDI/MDI-X auto-adaptation, the -40-85℃ operating temperature, can meet all kinds of industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.

1). Support 6 10/100Base-TX PoE port and 2 100Base-FX fiber port.

2). IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af/at.

3). IEEE802.3af, maximum 15.4W power supply.

4). Support IEEE802.3at, maximum 30W power supply.

5). Industrial chip design, 15kV ESD protection, 8kV surge protection.

6). 48-58VDC redundancy power, reverse polarity protection.

7). Industrial grade 4 design, -40-85°C operating temperature.

8). IP40 rated aluminum alloy housing, DIN-Rail mounted.

Protocol Standard

IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af/at

Flow Control

IEEE802.3x flow control, back press flow control

Switching Performance

Forwarding Rate: 1.19Mpps

Transmission Mode: Store and Forward

Packet Buffer Size: 512K

Backplane Bandwidth: 1.6Gbps

MAC Table Size: 1K

Delay Time: < 3μs

Ethernet Port

10/100Base-TX auto speed control, half/full duplex and MDI/MDI-X auto-adaptation

Fiber Port

100Base-FX fiber port


Pin-out: 1/2(+), 3/6(-), IEEE802.3af max 15.4W, IEEE802.3at max 30W.

LED Indicator

Power Indicator: PWR

Port Indicator: LINK / ACT

Power Supply

Input Voltage: 48-58VDC

Connector: 6 bit 5.08mm removable terminal block

Full Load: <4W

Protection Mechanism: overload protection, reverse connection protection, redundancy protection

Mechanical Structure

Shell: IP40 protection, aluminum alloy housing

Dimension: 143*104*48mm( L*W*H )

Weight: 550g

Installation: DIN-Rail mounting, wall mounting

Operating Environment

Operating Temperature: -40-85°C

Storage Temperature: -40-85°C

Ambient Relative Humidity: 5%-95% (non-condensing)

Industry Standards

EMI:FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:EN61000-4-2 (ESD), Level 4 at 15kV(Air), 8kV(Contact)

EN61000-4-3 (R/S), Level 3 at 10V/m

EN61000-4-4 (EFT), Level 4 at 4kV(Power Port), 2kV(Date Port)

EN61000-4-5 (Surge), Level 4 at 4kV

EN61000-4-6 (CS), Level 3 at 10V/m

EN61000-4-8, Level 5 at 100A/m

Shock:IEC 60068-2-27

Free Fall:IEC 60068-2-32

Vibration:IEC 60068-2-6




>100,000 Hours



Model No.

Description of Goods


Unmanaged Industrial PoE Switch, 6 10/100Base-TX PoE Port and 2 100Base-FX, SC Connector, Multimode, Dual Fiber, 2Km, DIN-Rail, 48-58VDC, -40-85°C Operating Temperature


Unmanaged Industrial PoE Switch, 6 10/100Base-TX PoE Port and 2 100Base-FX, SC Connector, Single Mode, Dual Fiber, 20Km, DIN-Rail, 48-58VDC, -40-85°C Operating Temperature


Unmanaged Industrial PoE Switch, 6 10/100Base-TX PoE Port and 2 100Base-FX, SC Connector, Single Mode, Single Fiber, 20Km, DIN-Rail, 48-58VDC, -40-85°C Operating Temperature


Unmanaged Industrial PoE Switch, 6 10/100Base-TX PoE Port and 2 100Base-X SFP Slot, DIN-Rail, 48-58VDC, -40-85°C Operating Temperature

Fiber Connector: SC/ST/FC/LC(SFP Slot), Single Mode/Multimode, Dual Fiber/Single Fiber, 2Km/20Km/40Km/60Km/80Km/100Km/120Km is Optional.

Power Supply: 48VDC DIN-Rail Power Supply or Power Adapter is Optional.