1 Port 100FX to 1 10/100TX Industrial Ethernet Switch

FF-IES0101F is a plug-and-play unmanaged industrial Ethernet switch, which can provide economical solution for your Ethernet. Its dust-proof fully sealed structure(IP40 protection grade), over-current, over-voltage and EMC protected, redundant double power input as well as built-in intelligent alarm design can help system main tenancy personnel monitor the network operation, which can work reliably in harsh and dangerous environment.
FF-IES0101F support 1 100Base-FX fiber port and 1 10/100Base-TX Ethernet port. It support CE, FCC, RoHS standard, rugged high-strength metal case, power input (10-58VDC). The switch support IEEE802.3, IEEE802.3u, IEEE802.3x with 10/100Base-TX, full/half-duplex, and MDI/MDI-X auto-adaptation, the -40-85℃ operating temperature can meet all kinds of industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.

1). Support 1 100Base-FX fiber port and 1 10/100Base-TX Ethernet port.

2). Support IEEE802.3, IEEE802.3u, IEEE802.3x.

3). Plug-and-play, 10/100Base-TX, full/half duplex, MDI/MDI-X auto-adaptation.

4). Industrial chip design, 15kV ESD protection, 8kV surge protection.

5). 10-58VDC redundancy power, reverse polarity protection.

6). Industrial grade 4 design, -40-85°C operating temperature.

7). IP40 rated aluminum alloy housing, DIN-Rail mounted.

Protocol Standard

IEEE802.3, IEEE802.3u, IEEE802.3x

Flow Control

IEEE802.3x flow control, back press flow control

Switching Performance

Forwarding Rate: 0.744Mpps

Transmission Mode: Store and Forward

Packet Buffer Size: 512K

Backplane Bandwidth: 1Gbps

MAC Table Size: 1K

Delay Time: < 3μs

Ethernet Port

10/100Base-TX auto speed control, full/half duplex and MDI/MDI-X auto-adaptation

Fiber Port

100Base-FX fiber port

LED Indicator

Power Indicator: PWR

Port Indicator: LINK / ACT

Power Supply

Input Voltage: 10-58VDC

Connector: 6 bit 5.08mm removable terminal block

Full Load: <3W

Protection Mechanism: overload protection, reverse connection protection, redundancy protection

Mechanical Structure

Shell: IP40 protection, aluminum alloy housing

Dimension: 143*104*48mm( L*W*H )

Weight: 500g

Installation: DIN-Rail mounting, wall mounting

Operating Environment

Operating Temperature: -40-85°C

Storage Temperature: -40-85°C

Ambient Relative Humidity: 5%-95% (non-condensing)

Industry Standards

EMI:FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:EN61000-4-2 (ESD), Level 4 at 15kV(Air), 8kV(Contact)

EN61000-4-3 (R/S), Level 3 at 10V/m

EN61000-4-4 (EFT), Level 4 at 4kV(Power Port), 2kV(Date Port)

EN61000-4-5 (Surge), Level 4 at 4kV

EN61000-4-6 (CS), Level 3 at 10V/m

EN61000-4-8, Level 5 at 100A/m

Shock:IEC 60068-2-27

Free Fall:IEC 60068-2-32

Vibration:IEC 60068-2-6




>100,000 Hours



Industrial Ethernet Switch

Model No.

Description of Goods


Unmanaged Industrial Ethernet Switch, 1 100Base-FX and 1 10/100Base-TX, SC Connector, Multimode, Dual Fiber, 2Km, DIN-Rail, 10-58VDC, -40-85°C Operating Temperature


Unmanaged Industrial Ethernet Switch, 1 100Base-FX and 1 10/100Base-TX, SC Connector, Single Mode, Dual Fiber, 20Km, DIN-Rail, 10-58VDC, -40-85°C Operating Temperature


Unmanaged Industrial Ethernet Switch, 1 100Base-FX and 1 10/100Base-TX, SC Connector, Single Mode, Single Fiber, 20Km, DIN-Rail, 10-58VDC, -40-85°C Operating Temperature


Unmanaged Industrial Ethernet Switch, 1 100Base-X SFP Slot and 1 10/100Base-TX, DIN-Rail, 10-58VDC, -40-85°C Operating Temperature
Fiber Connector: SC/ST/FC/LC(SFP Slot), Single Mode/Multimode, Dual Fiber/Single Fiber, 2Km/20Km/40Km/60Km/80Km/100Km/120Km is Optional.

Power Supply: 24VDC DIN-Rail Power Supply or Power Adapter is Optional.